Voltera V One

The Voltera V­-One* brings quick turn PCBs to your desktop. Import your Gerber file into the Voltera software, press print, and the V-­One will bring your board to life. Use the solder paste dispensing and reflow features to mount components onto your printed board, or mount components on a pre­fabricated board with ease.

The V­-One includes all the accessories and consumables you need to get started.

• 1 Conductive ink cartridge
• 1 Solder paste cartridge
• 1 Probe
• 10 2"x3" substrates
• 6 3"x4" substrates
• 4 225 micron nozzles
• 2 Substrate clamps
• 2 Dispensers with caps
• 1 Burnishing Pad
• 1 Solder wire spool
• 1 Hello World starter kit

*The PCB printer and drill attachment are sold separately. 

The V-One Drill attachement allows you to  create double sided boards. Use this drilling attachment to make vias and through holes; then connect the top and bottom layers with rivets.

The drill mounts on the V-One just like the probe or dispenser but is externally powered. The operation is automated and surprisingly quiet. Just be sure to wear the safety glasses provided!

The attachment includes the following accessories:

• 1 Drill bit set
• 200 0.4mm Rivets
• 200 1.0mm Rivets
• 2 Rivet tools
• 1 Sacrificial Layer
• 10 2"x3" Substrates
• 6 3"x4" Substrates
• 1 Set of safety glasses
• Punk Console Component Kit

If you would like a sample of a printed PCB board using the V-One then please request one here.