COVID-19 STATEMENT: We are open for business and our objective is for everyone to remain safe with minimum disruption.
Our aim is for all promised delivery dates to be met however, in some circumstances it may be necessary to adjust some of these dates.
We remain committed in communicating fully with you to keep you updated at all times.
We can provide information and literature on solutions that may benefit any upcoming projects therefore please do not hesitate to contact us.
Conductive inks can be purchased for your V One machine. Check product details for compatibility information. Please note, cartridges must be kept refrigerated, and have a shelf life of 6 months.
|Part Number||Description||Price||Product image|
|1000383||FLEX 2 Conductive Ink Cartridge 1 x 2mL cartridge The second generation flexible conductive ink allows for higher conductivity, better printing resolution, improved bending performance, and more robust soldering - all the ingredients required to print your own flexible circuits. Compatible with PET, polyimide, and other flexible polymer substrates. Recommended curing temperature 160C for 30 minutes (measured at ink surface). Cure immediately after printing for best flexibility Solder with Tin-Bismuth-Silver solder wire and flux at 180C, or preset profile for reflow soldering. Cartridges should be kept refrigerated.||£105.00|
|1000388||Conductive 2 Ink - Full Cartridge 1 x 2mL cartridge The key to printing a circuit board with the V-One is in the ink. The printer lays down silver ink as the traces and pads that comprise your board. After thermal curing, the ink is conductive and ready for reflow. Each cartridge prints approximately 85 simple boards. Cartridges must be kept refrigerated, and have a shelf life of 6 months.||£95.00|