COVID-19 STATEMENT: We are open for business and our objective is for everyone to remain safe with minimum disruption.
Our aim is for all promised delivery dates to be met however, in some circumstances it may be necessary to adjust some of these dates.
We remain committed in communicating fully with you to keep you updated at all times.
We can provide information and literature on solutions that may benefit any upcoming projects therefore please do not hesitate to contact us.
The DRA range are DIN Rail mounting 2 or 3 channel isolation amplifiers that can be configured during manufacture. Standard options are offered with 3 types of inputs, External Current Shunt, Internal Current Shunt and Internal Voltage Divider. It can also be offered as a customised unit with the input scaling and configuration defined by the user.
Isolation amplifiers provides a means to measure signals without the signal ground and measurement ground being directly connected. This is desirable in a number of instances in industrial applications:
The DRA isolation amplifiers have been designed to measure voltage or current. They have 3 channels that can be configured to measure anything from millivolts full scale up to ±1000V full scale. The signal may be voltage from an electrical supply, the phase of a motor, a solenoid drive, or it may be a voltage derived from a sensor such as a current sense resistor.
|610268||DRA005 - 3 channel external current shunt||£495.00|
|610269||DRA006 - 3 channel internal current shunt||£495.00|
|610270||DRA007 - 3 channel voltage||£495.00|
|610271||DRA008 - Single phase voltage and external current shunt||£345.00|
|610272||DRA009 - Single phase voltage and internal current shunt||£345.00|
|620176||DRA004 - Generic Isolation Amplifier||RFQ only|